Most advice about radio frequency exposure stops at the front door, but a yard has its own sources: a neighbor’s router, a cell antenna down the road, a utility pole at the fence line. The goal here is simple. Find the part of your property with the lowest readings and put the places where you actually sit, garden or play there.
What outdoor readings usually look like
Outdoors you are usually farther from the sources that matter indoors, and nothing is bouncing radio waves around the way walls and furniture do. Published measurements help set expectations.
Mapping your yard with a meter
An RF meter is the right tool for this job, because the sources outside are mostly radio transmitters. Walk the yard slowly and write down what the meter shows in each spot rather than trusting a single reading.
Why position changes the reading
RF radiation follows line-of-sight and distance. Parts of your yard shielded by your house or further from sources will have lower readings. In open space, the power from a small RF source falls with the square of the distance, so doubling your distance cuts it to a quarter (a 75% reduction). Real yards have reflections and several sources, so check with a meter.
Read the full guide: EMF Tip #84: Create a Low-EMF Zone in Your Yard
